Home > Exhibition > Content

Considerations for using manual tile cutter

Hangzhou John Hardware Tools Co.,Ltd | Updated: Apr 01, 2016

1, when cut, pull back, "handles" to lift up to the highest position control to prevent knife collision with the tiles, or blades cannot be used because of the defect.

2, for the antique or other uneven surfaces such as tiles, replace the cutter! Puckering surface tiles will shorten the service life of the blades.

3, press the operation do not use blades broken bricks.

4, cutting, first push and pull the lever to the back-end, let the press above the tile blade, pushed to front control along along the spindle nut slot, presser foot is put aside on top of tile, tap end of the push/pull handle, ceramic tiles with knife breaks

Reminder: in the process of cutting, when Mark cutting lines as thin as possible, and tile press cracked brick edge shape is more beautiful. In contrast, the deeper the cut line rough, brick split brick shape at the end of the more inclined the more crooked, when like a jagged, so promoting the strength should be light, but the tiles above the cut mark is not interrupted, or ceramic tiles will appear pop corner.

Our Service


Contact Us

Address:No.5, Lvtai Road, Zhongtai Industrial District, Yuhang, Hangzhou, Zhejiang, China

Tel: 0086-571-88637866

Fax: 0086-571-88637844


CopyRight© Hangzhou John Hardware Tools Co.,Ltd